LED feedback

The table below lists the LED behavior in specific situations:

Description	LED 1 (USB)	LED 2 (Scanner)	LED 3 (Cloud)
Gateway boots up (about 1 minute)			All LEDs alternating blue/green from left to right until start
Gateway connected to target device via USB	Constantly green
Gateway connected to no scanners		Off
Gateway connected to one or more scanners via BLE		Constantly green
Gateway connected to the maximum number of allowed scanners		Constantly red
Gateway cannot connect to another scanner but a scanner tries to connect		Red flashes 3 times
Gateway receives data from scanner		Blue flashes
Gateway sends data to host system	Blue flashes
Gateway USB Mass Storage activated/deactivated			All LEDs flash blue three times
All files on Gateway Mass Storage processed successfully			All LEDs flash green three times
Failure in processing files on Gateway Mass Storage			All LEDs flash red three times
Gateway firmware update in progress			All LEDs alternating purple/yellow from left to right until start
Scanner firmware update started			All LEDs flash purple three times
Gateway searching for network			Yellow flashes constantly
Gateway connected to network and searching for Insight Webportal			Constantly yellow
Gateway connected to Insight Webportal			Constantly green
Gateway receives data from scanner or sends data to Insight Webportal			Blue flashes